Bush Hog® Pull Disc Harrows DHP Series
Contact for Price
listing image
  • listing image
Call 519-449-2500

Item Details

ID: 13651391
Make: Bush Hog®
Type: New
Year: 2017
Model: Pull Disc Harrows DHP Series
Number Of Flanges :

Item Description

Pull Disc Harrows
DHP Series

Bush Hog’s new Pull Disc Harrows, the DHP Series, are designed for pulverizing soil, seed bed preparation and general tillage. Solid built units available in widths of 8’, 10’ and 12’, the DHP line of disc harrows are ideally suited for use by small farmers, food plot managers, ranchers, construction crews and nursery operators. The DHP Series units share many features available on larger, more expensive models, including front-to-rear leveling, a depth control system, adjustable-gang angles, and streamlined tubular gang hangers. Multiple blade spacing options are available with your DHP Series Pull Disc harrows. Blade spacings of 7-1/2” allow for fine, finish discing needed for seedbed preparation or 9 inches for breaking up and fracturing “new ground” or a combination of the two. Six multiple blade spacing options for each model are available with your DHP Series Pull Disc Harrows; 20” or 22” notched discs at each of following spacing options: 7.5” front & rear, 9” front & rear, 9” front and 7.5”rear. High strength 1-1/8” square gang axles, combined with tough gang components, and triple lip sealed ball bearings, ensure the DHP models are ready for the toughest jobs. Put a Bush Hog DHP disc harrow to work for you today
   Performance Features
  • Square and rectangle tube steel frames and gang tubes
  •  Adjustable gang angles, front and rear
  •  Variable Blade Spacings Available: 9” front and rear gangs for tough-to-cut “New Ground” • 7 1/2” front and rear gangs for finer soil finishing • 9” front gangs/7 1/2” rear gangs–the best of both worlds
  • Notched disc blades for maximum cutting action
  • 1 1/8” square, high carbon steel gang axles
  •  Available in tractor colors
  •  Optional disc scrapers, Center Sweep Kit, Dual Wheel Transport Kit
   Product Features

Bearing hangers reinforces with gussets

Notched discs for maximum cutting action
  Specifications
 
Model Number DHP8 DHP10 DHP12
Drawbar horsepower requirement 40-65 hp 45-100 hp 55-100 hp
Hitch type Pull-type w/clevis & hole for 1 1/4” pin
Approximate transport width 8’-10” 10’-10” 12’-4”
Max. cultivation width 8’-6” 10”-6” 12’
Mainframe width 60” 93 1/2” 93 1/2”
Approx weight load on each blade (lbs.) 85-95 84-94 82-92
Disc blade sizes and types 20” or 22” Notched
Disc blade spacing 7.5” or 9” or a combination of both
Disc bearing type Triple lip sealed ball bearings
Number of bearings 8 12 12
Forward gang angle adjustment 15, 16.5, 18, 19.5, 21 Degrees
Rear gang a ngle adjustment 12, 13.5, 15, 16.5, 18 Degrees
Hitch frame construction 4” x 4” x 1/4” tubing
Slide mainframe construction 4” x 3” x 1/4” tubing
Mainframe front & rear tube construction 5” x 3” x 1/4” tubing
Mainframe middle tube construction 4” x 3” x 1/4” tubing
Gang arm construction 4” x 3” x 1/4” tubing
Gang axles 1 1/8” Square, High Carbon Steel
Front to rear leveling system Manual crank adjustment
Depth control Cylinder stroke control spacers
Hydraulic cylinder 3- 1/2” x 8” ASAE hydraulic cylinder
Transport tires and wheels Two 9.5L x 15 tires on 15” x 6” - 5 bolt wheels
Parking jack Standard